Pass Juniper JN0-664 Exam Quickly With ExamsReviews
Prepare JN0-664 Question Answers - JN0-664 Exam Dumps
Successful completion of the Juniper JN0-664 Certification Exam demonstrates an individual's ability to design, implement, and troubleshoot complex service provider networks. It also demonstrates an individual's ability to configure and manage Juniper Networks' routing and switching platforms to meet the needs of service provider customers.
Juniper JN0-664 exam is a professional-level certification exam for service provider professionals seeking to advance their careers. JN0-664 exam is designed to test the candidate's knowledge and skills in configuring and troubleshooting Junos-based service provider routing platforms and networks. Passing the exam validates the candidate's expertise in designing, implementing, and maintaining Juniper Networks service provider networks.
Juniper JN0-664 exam focuses on different areas such as Juniper Networks’ technology, service provider routing and switching, and platform configuration and troubleshooting. It also covers the topics of Border Gateway Protocol (BGP), Intermediate System to Intermediate System (IS-IS), Open Shortest Path First (OSPF), and Multiprotocol Label Switching (MPLS).
NEW QUESTION # 11
Which two statements are correct about reflecting inet-vpn unicast prefixes in BGP route reflection? (Choose two.)
- A. Clients add their originator ID when advertising routes to their route reflector
- B. Route reflectors add their cluster ID to the AS path when readvertising client routes.
- C. Route reflectors do not change any existing BGP attributes by default when advertising routes.
- D. A BGP peer does not require any configuration changes to become a route reflector client.
Answer: C,D
Explanation:
Explanation
Route reflection is a BGP feature that allows a router to reflect routes learned from one IBGP peer to another IBGP peer, without requiring a full-mesh IBGP topology. Route reflectors do not change any existing BGP attributes by default when advertising routes, unless explicitly configured to do so. A BGP peer does not require any configuration changes to become a route reflector client, only the route reflector needs to be configured with the client parameter under [edit protocols bgp group group-name neighbor neighbor-address] hierarchy level.
NEW QUESTION # 12
Exhibit
Referring to the exhibit, which three statements are correct about route 10 0 0.0/16 when using the default BGP advertisement rules'? (Choose three.)
- A. R4 will advertise 10 0.0 0/16 to R6 with 172.16 1 1 as the next hop
- B. R1 will advertise 10.0.0.0/16 to R2 with 192 168 1 1 as the next hop.
- C. R2 will advertise 10.0.0.0/16 to R3 with 192.168.1 1 as the next hop
- D. R1 will prepend AS 65531 when advertising 10 0.0 0/16 to R2.
- E. R2 will advertise 10.0.0.0/16 to R4 with 172.16.1.1 as the next hop
Answer: A,B,E
Explanation:
Explanation
The problem in this scenario is that R1 and R8 are not receiving each other's routes because of private AS numbers in the AS path. Private AS numbers are not globally unique and are not advertised to external BGP peers. To solve this problem, you need to do the following:
* Configure loops on routers in AS 65412 and advertise-peer-as on routers in AS 64498. This allows R5 and R6 to advertise their own AS number (65412) instead of their peer's AS number (64498) when sending updates to R7 and R8. This prevents a loop detection issue that would cause R7 and R8 to reject the routes from R5 and R62
* Configure remove-private on advertisements from AS 64497 toward AS 64498 and from AS 64500 toward AS 64499. This removes any private AS numbers from the AS path before sending updates to external BGP peers. This allows R2 and R3 to receive the routes from R1 and R4, respectively3.
NEW QUESTION # 13
After a recent power outage, your manager asks you to investigate ways to automatically reduce the impact caused by suboptimal routing in your OSPF and OSPFv3 network after devices reboot.
Which three configuration statements accomplish this task? (Choose three.)
- A. set protocols ospf overload
- B. set protocols ospf overload timeout 900
- C. set protocols oapf3 overload timeout 900
- D. set protocols ospf3 overload
- E. set protocols ospf3 realm ipv4-unicast overload timeout 900
Answer: B,D
Explanation:
Explanation
To reduce the impact of suboptimal routing in OSPF and OSPFv3 after devices reboot, you can use the overload feature to prevent a router from being used as a transit router for a specified period of time. This allows the router to stabilize its routing table before forwarding traffic for other routers. To enable the overload feature, you need to do the following:
* For OSPF, configure the overload statement under [edit protocols ospf] hierarchy level. You can also specify a timeout value in seconds to indicate how long the router should remain in overload state after it boots up. For example, set protocols ospf overload timeout 900 means that the router will be in overload state for 15 minutes after it boots up.
* For OSPFv3, configure the overload statement under [edit protocols ospf3] hierarchy level. You can also specify a realm (ipv4-unicast or ipv6-unicast) and a timeout value in seconds to indicate how long the router should remain in overload state after it boots up for each realm. For example, set protocols ospf3 realm ipv4-unicast overload timeout 900 means that the router will be in overload state for 15 minutes after it boots up for IPv4 unicast routing.
NEW QUESTION # 14
Which three mechanisms are used by Junos platforms to evaluate incoming traffic for CoS purposes? (Choose three )
- A. behavior aggregate classifiers
- B. traffic shapers
- C. fixed classifiers
- D. rewrite rules
- E. multifield classifiers
Answer: A,C,E
Explanation:
Explanation
Junos platforms use different mechanisms to evaluate incoming traffic for CoS purposes, such as:
* Behavior aggregate classifiers: These classifiers use a single field in a packet header to classify traffic into different forwarding classes and loss priorities based on predefined or user-defined values.
* Fixed classifiers: These classifiers use a fixed field in a packet header to classify traffic into different forwarding classes and loss priorities based on predefined values.
* Multifield classifiers: These classifiers use multiple fields in a packet header to classify traffic into different forwarding classes and loss priorities based on user-defined values and filters.
Rewrite rules and traffic shapers are not used to evaluate incoming traffic for CoS purposes, but rather to modify or shape outgoing traffic based on CoS policies.
NEW QUESTION # 15
A packet is received on an interface configured with transmission scheduling. One of the configured queues In this scenario, which two actions will be taken by default on a Junos device? (Choose two.)
- A. The exceeding queue will be considered to have positive bandwidth credit
- B. The excess traffic will be discarded
- C. The exceeding queue will be considered to have negative bandwidth credit.
- D. The excess traffic will use bandwidth available from other queueses
Answer: B,C
Explanation:
Explanation
Transmission scheduling is a CoS feature that allows you to allocate bandwidth among different queues on an interface. Each queue has a configured bandwidth percentage that determines how much of the available bandwidth it can use. If a queue exceeds its allocated bandwidth, it is considered to have negative bandwidth credit and its excess traffic will be discarded by default. If a queue does not use all of its allocated bandwidth, it is considered to have positive bandwidth credit and its unused bandwidth can be shared by other queues.
NEW QUESTION # 16
Which two statements about IS-IS are correct? (Choose two.)
- A. CSNPs are flooded periodically
- B. PSNPs contain only descriptions of LSPs.
- C. PSNPs are flooded periodically.
- D. CSNPs contain only descriptions of LSPs.
Answer: A,B
Explanation:
Explanation
IS-IS is an interior gateway protocol that uses link-state routing to exchange routing information among routers within a single autonomous system. IS-IS uses two types of packets to synchronize link-state databases among routers: Link State Packets (LSPs) and Partial Sequence Number Packets (PSNPs). LSPs contain information about the state and cost of links in the network, and are flooded periodically throughout the network. PSNPs are used to acknowledge receipt of LSPs and request retransmission of missing or corrupted LSPs. PSNPs contain only descriptions of LSPs, such as their sequence numbers and checksums3. IS-IS also uses another type of packet called Complete Sequence Number Packets (CSNPs), which are used to summarize the entire link-state database at regular intervals or when a new adjacency is formed. CSNPs are flooded periodically throughout the network and contain only descriptions of LSPs4. Therefore, PSNPs contain only descriptions of LSPs and CSNPs are flooded periodically.
References: 3:
https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/concept/routing-policy-is-is-p
4:
https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/concept/routing-policy-is-is-c
NEW QUESTION # 17
Which two statements are correct regarding bootstrap messages that are forwarded within a PIM sparse mode domain? (Choose two.)
- A. Bootstrap messages are forwarded only to routers that explicitly requested the messages within the PIM sparse-mode domain
- B. Bootstrap messages distribute RP information dynamically during an RP election.
- C. Bootstrap messages are used to notify which router is the PIM RP
- D. Bootstrap messages are forwarded to all routers within a PIM sparse-mode domain.
Answer: B,D
Explanation:
Explanation
Bootstrap messages are PIM messages that are used to distribute rendezvous point (RP) information dynamically during an RP election. Bootstrap messages are sent by bootstrap routers (BSRs), which are routers that are elected to perform the RP discovery function for a PIM sparse-mode domain. Bootstrap messages contain information about candidate RPs and their multicast groups, as well as BSR priority and hash mask length. Bootstrap messages are forwarded to all routers within a PIM sparse-mode domain using hop-by-hop flooding.
NEW QUESTION # 18
You are configuring a BGP signaled Layer 2 VPN across your MPLS enabled core network. In this scenario, which statement is correct?
- A. You must use the same route-distinguiaher value on both PE devices.
- B. You must assign a unique site number to each attached site's configuration.
- C. This type of VPN only supports Ethernet interfaces when connecting to CE devices.
- D. This type of VPN requires the support of the inet-vpn NLRI on all core BGP devices
Answer: D
Explanation:
Explanation
BGP signaled Layer 2 VPN is a type of VPN that uses BGP to distribute VPN labels and information for Layer 2 connectivity between sites over an MPLS network. BGP signaled Layer 2 VPN requires the support of the l2vpn NLRI on all core BGP devices . The l2vpn NLRI is a new address family that carries Layer 2 VPN information such as the VPN identifier, the attachment circuit identifier, and the route distinguisher. The l2vpn NLRI is used for both auto-discovery and signaling of Layer 2 VPNs . In this scenario, we are configuring a BGP signaled Layer 2 VPN across an MPLS enabled core network. Therefore, we need to ensure that all core BGP devices support the l2vpn NLRI.
References: 1:
https://www.juniper.net/documentation/us/en/software/junos/vpn-l2/topics/concept/vpn-layer-2-overview.html
2:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-16/mp-l2-vpns-xe-16-book/vpl
NEW QUESTION # 19
Exhibit
The environment is using BGP All devices are in the same AS with reachability redundancy Referring to the exhibit, which statement is correct?
- A. Peering is dynamically discovered between all devices.
- B. RR2 is in an OpenConfirm State until RR1 becomes unreachable.
- C. RR1 is peered to Client2 and RR2
- D. Client1 is peered to Client2 and Client3.
Answer: C
Explanation:
Explanation
BGP route reflectors are BGP routers that are allowed to ignore the IBGP loop avoidance rule and advertise IBGP learned routes to other IBGP peers under specific conditions. BGP route reflectors can reduce the number of IBGP sessions and updates in a network by eliminating the need for a full mesh of IBGP peers.
BGP route reflectors can have three types of peerings:
* EBGP neighbor: A BGP router that belongs to a different autonomous system (AS) than the route reflector.
* IBGP client neighbor: An IBGP router that receives reflected routes from the route reflector. A client does not need to peer with other clients or non-clients.
* IBGP non-client neighbor: An IBGP router that does not receive reflected routes from the route reflector. A non-client needs to peer with other non-clients and the route reflector.
In the exhibit, we can see that RR1 and RR2 are route reflectors in the same AS with reachability redundancy.
They have two types of peerings: EBGP neighbors (R1 and R4) and IBGP client neighbors (Client1, Client2, and Client3). RR1 and RR2 are also peered with each other as IBGP non-client neighbors.
NEW QUESTION # 20
Exhibit.
Referring to the exhib.t, what must be changed to establish a Level 1 adjacency between routers R1 and R2?
- A. Change the level l disable parameter under the R1 protocols isis interface lo0.0 hierarchy to the level 2 disable parameter.
- B. Add IP addresses to the interface ge-l/2/3 unit 0 family iso hierarchy on both R1 and R2.
- C. Change the level 1 disable parameter under the R2 protocols isis interface ge-1/2/3 .0 hierarchy to the level 2 disable parameter
- D. Remove the level i disable parameter under the R2 protocols isis interface loo . 0 configuration hierarchy.
Answer: D
Explanation:
Explanation
IS-IS routers can form Level 1 or Level 2 adjacencies depending on their configuration and network topology.
Level 1 routers are intra-area routers that share the same area address with their neighbors. Level 2 routers are inter-area routers that can connect different areas. Level 1-2 routers are both intra-area and inter-area routers that can form adjacencies with any other router.
In the exhibit, R1 and R2 are in different areas (49.0001 and 49.0002), so they cannot form a Level 1 adjacency. However, they can form a Level 2 adjacency if they are both configured as Level 1-2 routers. R1 is already configured as a Level 1-2 router, but R2 is configured as a Level 1 router only, because of the level 1 disable command under the lo0.0 interface. This command disables Level 2 routing on the loopback interface, which is used as the router ID for IS-IS.
Therefore, to establish a Level 1 adjacency between R1 and R2, the level 1 disable command under the R2 protocols isis interface lo0.0 hierarchy must be removed. This will enable Level 2 routing on R2 and allow it to form a Level 2 adjacency with R1.
NEW QUESTION # 21
When building an interprovider VPN, you notice on the PE router that you have hidden routes which are received from your BGP peer with family inet labeled-unica3t configured.
Which parameter must you configure to solve this problem?
- A. Under the protocols ospf hierarchy, add the traffic-engineering parameter.
- B. Under the protocols mpls hierarchy, add the traffic-engineering parameter
- C. Under the family inet labeled-unicast hierarchy, add the explicit null parameter.
- D. Under the family inet labeled-unicast hierarchy, add the resolve-vpn parameter.
Answer: D
Explanation:
Explanation
The resolve-vpn parameter is a BGP option that allows a router to resolve labeled VPN-IPv4 routes using unlabeled IPv4 routes received from another BGP peer with family inet labeled-unicast configured. This option enables interprovider VPNs without requiring MPLS labels between ASBRs or using VRF tables on ASBRs. In this scenario, you need to configure the resolve-vpn parameter under [edit protocols bgp group external family inet labeled-unicast] hierarchy level on both ASBRs.
NEW QUESTION # 22
Exhibit
You are asked to exchange routes between R1 and R4 as shown in the exhibit. These two routers use the same AS number Which two steps will accomplish this task? (Choose two.)
- A. Configure the BGP group with the advertise-peer-as parameter on R2 and R3.
- B. Configure the BGP group with the as-override parameter on R1 and R4
- C. Configure the BGP group with the as-override parameter on R2 and R3
- D. Configure the BGP group with the advertise-peer-as parameter on R1 and R4.
Answer: C,D
Explanation:
Explanation
The advertise-peer-as parameter allows a router to advertise its peer's AS number as part of the AS path attribute when sending BGP updates to other peers. This parameter is useful when two routers in the same AS need to exchange routes through another AS, such as in the case of R1 and R4. By configuring this parameter on R1 and R4, they can advertise each other's AS number to R2 and R3, respectively.
The as-override parameter allows a router to replace the AS number of its peer with its own AS number when receiving BGP updates from that peer. This parameter is useful when two routers in different ASes need to exchange routes through another AS that has the same AS number as one of them, such as in the case of R2 and R3. By configuring this parameter on R2 and R3, they can override the AS number of R1 and R4 with their own AS number when sending BGP updates to each other.
NEW QUESTION # 23
You are configuring a BGP signaled Layer 2 VPN across your MPLS enabled core network. Your PE-2 device connects to two sites within the s VPN In this scenario, which statement is correct?
- A. By default on PE-2, the remote site IDs are automatically assigned based on the order that you add the interfaces to the site configuration.
- B. You must use separate physical interfaces to connect PE-2 to each site.
- C. You must create a unique Layer 2 VPN routing instance for each site on the PE-2 device.
- D. By default on PE-2, the site's local ID is automatically assigned a value of 0 and must be configured to match the total number of attached sites.
Answer: A
Explanation:
Explanation
BGP Layer 2 VPNs use BGP to distribute endpoint provisioning information and set up pseudowires between PE devices. BGP uses the Layer 2 VPN (L2VPN) Routing Information Base (RIB) to store endpoint provisioning information, which is updated each time any Layer 2 virtual forwarding instance (VFI) is configured. The prefix and path information is stored in the L2VPN database, which allows BGP to make decisions about the best path.
In BGP Layer 2 VPNs, each site has a unique site ID that identifies it within a VFI. The site ID can be manually configured or automatically assigned by the PE device. By default, the site ID is automatically assigned based on the order that you add the interfaces to the site configuration. The first interface added to a site configuration has a site ID of 1, the second interface added has a site ID of 2, and so on.
Option D is correct because by default on PE-2, the remote site IDs are automatically assigned based on the order that you add the interfaces to the site configuration. Option A is not correct because by default on PE-2, the site's local ID is automatically assigned a value of 0 and does not need to be configured to match the total number of attached sites. Option B is not correct because you do not need to create a unique Layer 2 VPN routing instance for each site on the PE-2 device. You can create one routing instance for all sites within a VFI. Option C is not correct because you do not need to use separate physical interfaces to connect PE-2 to each site. You can use subinterfaces or service instances on a single physical interface.
NEW QUESTION # 24
Exhibit
You want to implement the BGP Generalized TTL Security Mechanism (GTSM) on the network Which three statements are correct in this scenario? (Choose three)
- A. BGP GTSM requires a TTL of 1 to be configured between neighbors.
- B. You can implement BGP GTSM between R2, R3, and R4
- C. BGP GTSM requires a TTL of 255 to be configured between neighbors.
- D. You can implement BGP GTSM between R2 and R1.
- E. BGP GTSM requires a firewall filter to discard packets with incorrect TTL.
Answer: A,B,C
Explanation:
Explanation
BGP GTSM is a technique that protects a BGP session by comparing the TTL value in the IP header of incoming BGP packets against a valid TTL range. If the TTL value is within the valid TTL range, the packet is accepted. If not, the packet is discarded. The valid TTL range is from 255 - the configured hop count + 1 to
255. When GTSM is configured, the BGP packets sent by the device have a TTL of 255. GTSM provides best protection for directly connected EBGP sessions, but not for multihop EBGP or IBGP sessions because the TTL of packets might be modified by intermediate devices.
In the exhibit, we can see that R2, R3, and R4 are in the same AS (AS 20) and R1 is in a different AS (AS 10).
Based on this information, we can infer the following statements:
* You can implement BGP GTSM between R2, R3, and R4. This is not correct because R2, R3, and R4 are IBGP peers and GTSM does not provide effective protection for IBGP sessions. The TTL of packets between IBGP peers might be changed by intermediate devices or routing protocols.
* BGP GTSM requires a firewall filter to discard packets with incorrect TTL. This is not correct because BGP GTSM does not require a firewall filter to discard packets with incorrect TTL. BGP GTSM uses TCP option 19 to negotiate GTSM capability between peers and uses TCP option 20 to carry the expected TTL value in each packet. The receiver checks the expected TTL value against the actual TTL value and discards packets with incorrect TTL values.
* You can implement BGP GTSM between R2 and R1. This is correct because R2 and R1 are EBGP peers and GTSM provides effective protection for directly connected EBGP sessions. The TTL of packets between directly connected EBGP peers is not changed by intermediate devices or routing protocols.
* BGP GTSM requires a TTL of 1 to be configured between neighbors. This is not correct because BGP GTSM requires a TTL of 255 to be configured between neighbors. The sender sets the TTL of packets to 255 and the receiver expects the TTL of packets to be 255 minus the configured hop count.
* BGP GTSM requires a TTL of 255 to be configured between neighbors. This is correct because BGP GTSM requires a TTL of 255 to be configured between neighbors. The sender sets the TTL of packets to 255 and the receiver expects the TTL of packets to be 255 minus the configured hop count.
NEW QUESTION # 25
Which statement is correct about IS-IS when it performs the Dijkstra algorithm?
- A. The local router moves its own local tuples into the candidate database
- B. When a new neighbor ID in the tree database matches a router ID in the LSDB, the neighbor ID is moved to the candidate database
- C. The algorithm will stop processing once the tree database is empty.
- D. Tuples with the lowest cost are moved from the tree database to the LSDB.
Answer: A
Explanation:
Explanation
IS-IS is a link-state routing protocol that uses the Dijkstra algorithm to compute the shortest paths between nodes in a network. The Dijkstra algorithm maintains three data structures: a tree database, a candidate database, and a link-state database (LSDB). The tree database contains the nodes that have been visited and their shortest distances from the source node. The candidate database contains the nodes that have not been visited yet and their tentative distances from the source node. The LSDB contains the topology information of the network, such as the links and their costs.
The Dijkstra algorithm works as follows:
* The local router moves its own local tuples into the tree database. A tuple consists of a node ID, a distance, and a parent node ID. The local router's tuple has a distance of zero and no parent node.
* The local router moves its neighbors' tuples into the candidate database. The neighbors' tuples have distances equal to the costs of the links to them and parent node IDs equal to the local router's node ID.
* The local router selects the tuple with the lowest distance from the candidate database and moves it to the tree database. This tuple becomes the current node.
* The local router updates the distances of the current node's neighbors in the candidate database by adding the current node's distance to the link costs. If a shorter distance is found, the parent node ID is also updated.
* The algorithm repeats steps 3 and 4 until either the destination node is reached or the candidate database is empty.
NEW QUESTION # 26
Exhibit
Based on the configuration contents shown in the exhibit, which statement is true?
- A. Joins for group 224.7.7.7 are always rejected, regardless of the group count.
- B. Joins for any group are accepted if the group count value is less than 25.
- C. Joins for group 224.7.7.7 are accepted if the group count is less than 25
- D. Joins for group 224.7.7.7 are rejected if the source address is 192.168.100.10
Answer: C
Explanation:
Explanation
BGP policy framework is a set of tools that allows you to control the flow of routing information and apply routing policies based on various criteria. BGP policy framework consists of several components, such as route maps, prefix lists, community lists, AS path lists, and route filters. Route maps are used to define routing policies by matching certain conditions and applying certain actions. Prefix lists are used to filter routes based on their prefixes. Community lists are used to filter routes based on their community attributes. AS path lists are used to filter routes based on their AS path attributes. Route filters are used to filter routes based on their prefix length or range3. In this question, we have a route map named ISP-A that has two clauses: clause 10 and clause 20. Clause 10 matches any route with a prefix length between 8 and 24 bits and sets the local preference to 200. Clause 20 matches any route with a prefix of 224.7.7.7/32 and rejects it. The route map is applied inbound on the BGP neighborship with ISP-A. Based on this configuration, the correct statement is that joins for group 224.7.7.7 are always rejected, regardless of the group count. This is because clause 20 explicitly denies any route with a prefix of 224.7.7.7/32, which corresponds to the multicast group 224.7.7.7.
NEW QUESTION # 27
In which two ways does OSPF prevent routing loops in multi-area networks? (Choose two.)
- A. The LFA algorithm prunes all looped paths within an area.
- B. All areas are required to connect to area 0.
- C. All areas are required to connect as a full mesh.
- D. The SPF algorithm prunes looped paths within an area.
Answer: B,D
Explanation:
Explanation
OSPF is an interior gateway protocol that uses link-state routing to exchange routing information among routers within a single autonomous system. OSPF prevents routing loops in multi-area networks by using two methods: area hierarchy and SPF algorithm. Area hierarchy is the concept of dividing a large OSPF network into smaller areas that are connected to a backbone area (area 0). This reduces the amount of routing information that each router has to store and process, and also limits the scope of link-state updates within each area. All areas are required to connect to area 0 either directly or through virtual links2. SPF algorithm is the method that OSPF uses to calculate the shortest path to each destination in the network based on link-state information. The SPF algorithm runs on each router and builds a shortest-path tree that represents the topology of the network from the router's perspective. The SPF algorithm prunes looped paths within an area by choosing only one best path for each destination3.
References: 2:
https://www.juniper.net/documentation/us/en/software/junos/ospf/topics/concept/ospf-area-overview.html 3:
https://www.juniper.net/documentation/us/en/software/junos/ospf/topics/concept/ospf-spf-algorithm-overview.ht
NEW QUESTION # 28
Which two EVPN route types are used to advertise a multihomed Ethernet segment? (Choose two )
- A. Type 4
- B. Type 2
- C. Type 1
- D. Type 3
Answer: A,C
Explanation:
Explanation
EVPN is a solution that provides Ethernet multipoint services over MPLS networks. EVPN uses BGP to distribute endpoint provisioning information and set up pseudowires between PE devices. EVPN uses different route types to convey different information in the control plane. The following are the main EVPN route types:
* Type 1 - Ethernet Auto-Discovery Route: This route type is used for network-wide messaging and discovery of other PE devices that are part of the same EVPN instance. It also carries information about the redundancy mode and load balancing algorithm of the PE devices.
* Type 2 - MAC/IP Advertisement Route: This route type is used for MAC and IP address learning and advertisement between PE devices. It also carries information about the Ethernet segment identifier (ESI) and the label for forwarding traffic to the MAC or IP address.
* Type 3 - Inclusive Multicast Ethernet Tag Route: This route type is used for broadcast, unknown unicast, and multicast (BUM) traffic forwarding. It also carries information about the multicast group and the label for forwarding BUM traffic.
* Type 4 - Ethernet Segment Route: This route type is used for multihoming scenarios, where a CE device is connected to more than one PE device. It also carries information about the ESI and the designated forwarder (DF) election process.
NEW QUESTION # 29
Exhibit
You want to use both links between R1 and R2 Because of the bandwidth difference between the two links, you must ensure that the links are used as much as possible.
Which action will accomplish this goal?
- A. Enable per-prefix load balancing.
- B. Define a policy to tag routes with the appropriate bandwidth community.
- C. Ensure that the metric-out parameter on the Gigabit Ethernet interface is higher than the 10 Gigibit Ethernet interface.
- D. Disable multipath.
Answer: A
Explanation:
Explanation
VPLS is a Layer 2 VPN technology that allows multiple sites to connect over a shared IP/MPLS network as if they were on the same LAN. VPLS tunnels can be signaled using either Label Distribution Protocol (LDP) or Border Gateway Protocol (BGP). In this question, we have two links between R1 and R2 with different bandwidths (10 Gbps and 1 Gbps). We want to use both links as much as possible for VPLS traffic. To achieve this, we need to enable per-prefix load balancing on both routers. Per-prefix load balancing is a feature that allows a router to distribute traffic across multiple equal-cost or unequal-cost paths based on the destination prefix of each packet. This improves the utilization of multiple links and provides better load sharing than per-flow load balancing, which distributes traffic based on a hash of source and destination addresses4. Per-prefix load balancing can be enabled globally or per interface using the load-balance per-packet command.
NEW QUESTION # 30
......
Real Juniper JN0-664 Exam Questions [Updated 2023]: https://easypass.examsreviews.com/JN0-664-pass4sure-exam-review.html