[Sep-2022] Updated JNCIS-SP JN0-362 Exam Questions BUNDLE PACK
Master The Juniper Content JN0-362 EXAM DUMPS WITH GUARANTEED SUCCESS!
Recommended Training Courses
Now, let’s focus on the recommended online course:
1. Junos Intermediate Routing (JIR)
Excelling in the Junos Intermediate Routing (JIR) course is one of the several ways to improve your chances of passing the actual exam, known as the Juniper JN0-362. This is intense training that runs for 2 days and involves hands-on labs and demonstrations to help you master everything there’s to know about Juniper routing technologies. This class provides a detailed overview of the mentioned test objectives including the features of protocol-independent routing, load balancing, high availability, IP tunneling, BGP, OSPF, and filter-based forwarding. Success in this course requires mastery of the concepts addressed by the Introduction to the Junos Operating System (IJOS) training and a background experience working with the TCP/IP and the Open Systems Interconnection (OSI) model. Also, Juniper highlights all the relevant products and technologies that will help you pass this exam including Automation, Junos OS, M Series, MX Series, PTX Series, T Series, Enterprise Routing and Switching Path, and Service Provider Routing and Switching path. In all, the course content is partitioned into several sections, depending on what the candidates will cover on specific days. Of course, the first session is all about introducing the course. Then, the focus will shift to the first 3 topics including protocol-independent routing, load balancing & filter-based forwarding, and open shortest path first. On the second day, be ready to work with the border gateway protocol, IP Tunneling, and High Availability.
Difficulty in writing JN0-362 Exam
Candidates already have experience and are networking professionals with beginner to intermediate knowledge with switching and routing experience so it is not difficult to pass the certifications. JN0-362 exam dumps and JN0-362 practice exams to revise the already discussed syllabus.
Juniper JN0-362 Exam Certification Details:
| Sample Questions | Juniper JN0-362 Sample Questions |
| Duration | 90 minutes |
| Exam Name | Service Provider Routing and Switching Specialist |
| Passing Score | Pass / Fail (60-70% Approx.) |
| Exam Registration | PEARSON VUE |
NEW QUESTION 27
Click the Exhibit button. You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a designated intermediate system (DIS)
Which configuration statement entered on both routers will achieve this goal?
- A. set protocols isis interface ge-0/0/2.0 point-to-point
- B. set interface ge-0/0/2 unit 0 family iso no-dis
- C. set protocols isis interface ge-0/0/2.0 no-dis
- D. set interface ge-0/0/2 unit 0 family iso point-to-point
Answer: A
NEW QUESTION 28
Click the exhibit.
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- A. The router is not sending hellos on the configured interface.
- B. Router is not receiving hellos on the configured interface.
- C. The OSPF version does not match on the configured interfaces.
- D. The area does not match on the configured interfaces.
Answer: D
NEW QUESTION 29
You are configuring a default static route using the default preference value. You want to ensure that any static route that you configure in the future will be less preferred than the OSPF routes that are configured on the network.
Which command will accomplish this task?
- A. set routing-options static defaults preference 20
- B. set routing-options static route <IP address> preference 9
- C. set routing-options static defaults passive
- D. set protocols ospf preference 6
Answer: A
NEW QUESTION 30
Click the Exhibit button.
Both configuration hierarchies shown in the exhibit have been committed to your MX Series device. Which two statements are true in this scenario? (Choose two.)
- A. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
- B. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
- C. Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop
- D. Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop
Answer: A,D
NEW QUESTION 31
Which two characteristics describe IS-IS? (Choose two.)
- A. A collection of Level 1 routers serves as the IS-IS backbone
- B. A collection of Level 2 routers serve as the IS-IS backbone
- C. Level 2 routers connect areas in an IS-IS autonomous system
- D. A Level 1 IS routes between areas and toward other autonomous systems
Answer: B,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/concept/isis-levels- understanding.html
NEW QUESTION 32
Which Layer 2 mechanism logically groups network nodes into separate broadcast domains?
- A. VLAN
- B. IS-IS levels
- C. IP subnets
- D. OSPF areas
Answer: A
NEW QUESTION 33
Click the Exhibit.
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
- A. Apply the next-hop-self as an import policy to the internal BGP peers.
- B. Apply the next-hop-self as an import policy to the external BGP peers.
- C. Apply the next-hop-self as an export policy to the external BGP peers.
- D. Apply the next-hop-self as an export policy to the internal BGP peers.
Answer: D
NEW QUESTION 34
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
- A. The route has yet to be verified
- B. The wrong BGP address family is enabled for the BGP session
- C. The protocol next hop is not reachable
- D. The MPLS LSP to the 192.168.0.2 peer is down
Answer: C
NEW QUESTION 35
Which two statements are true about IBGP on MX Series devices? (Choose two.)
- A. It does not support multihop
- B. It is loop free by default
- C. Neighbors can be located anywhere within the AS
- D. Interface Lo0 must be used for peering
Answer: B,C
NEW QUESTION 36
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
- A. destination port
- B. source port
- C. source address
- D. destination address
- E. protocol
Answer: C,D,E
NEW QUESTION 37
What is the Junos default router priority advertisement value for IS-IS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 38
Which two statements are correct regarding VPLS mesh groups? (Choose two.)
- A. Unicast packets destined to another PE router in a different mesh group are dropped by the local PE router.
- B. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.
- C. Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.
- D. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all remote PE routers.
Answer: B,C
NEW QUESTION 39
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
- B. Routes from 10.3.3.3 are more preferred than the default local preference
- C. Routes from 10.2.2.2 are less preferred than the default local preference
- D. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
Answer: B
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
- B. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
- C. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
- D. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
Answer: A,D
NEW QUESTION 41
Which two statements are true about VRRP? (Choose two.)
- A. Interfaces within the same VRRP group must be on the same subnet for each member.
- B. VRRP does not require redundant REs on each member.
- C. VRRP requires redundant REs on each member.
- D. Interfaces within the same VRRP group do not have to be on the same subnet for each member.
Answer: A,B
NEW QUESTION 42
Click the Exhibit button.
You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish. Referring to the exhibit, which statement correctly identifies the problem?
- A. R2 has a wrong area configured
- B. Hello and dead timers are not matching between R1 and R2
- C. R1 does not have a router ID defined
- D. R1 and R2 have the same router ID
Answer: D
NEW QUESTION 43
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1
- B. Routes from 10.3.3.3 are less preferred than the default local preference
- C. Routes from 10.1.1.1 are less preferred than the default local preference
- D. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
Answer: A
NEW QUESTION 44
Which two characteristics describe IS-IS? (Choose two.)
- A. A collection of Level 1 routers serves as the IS-IS backbone
- B. A collection of Level 2 routers serve as the IS-IS backbone
- C. Level 2 routers connect areas in an IS-IS autonomous system
- D. A Level 1 IS routes between areas and toward other autonomous systems
Answer: B,C
NEW QUESTION 45
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
- B. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- C. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- D. The OSPF neighbor will be declared down if three BFD hello packets are missed
Answer: C,D
Explanation:
Explanation
NEW QUESTION 46
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?
- A. Next Hop
- B. MED
- C. AS-Path
- D. Communities
Answer: B
NEW QUESTION 47
Which statement about a virtual-routertype of routing instance is correct?
- A. It is used to create and maintain separate routing and forwarding tables
- B. It is used to separate large networks into smaller administrative entities
- C. It is the only routing instance type supported on Junos devices
- D. It is used in Layer 3 VPN implementations
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 48
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to remove the tunnel interface from inet.0 after the hold-time expires
- B. to mark the tunnel down after the hold-time expires
- C. to reduce the risk of forwarding traffic through a stateless tunnel
- D. to mark the tunnel up after the hold-time expires
Answer: B,C
NEW QUESTION 49
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
- A. PSNP
- B. LSP
- C. CSNP
- D. IIH
Answer: A,C
NEW QUESTION 50
You have recently configured MSTP on two switches in your network to participate in the same MSTP region. You issue the show spanning-tree mstp configuration command on both switches and notice that the configuration digests do not match.
What does this mismatch indicate?
- A. You should ensure that the bridge IDs and priority values are unique on both switches.
- B. Everything is functioning as expected because the configuration digests should not match.
- C. You should ensure that the max-age and hello timers are equal on both switches.
- D. You should ensure that the MSTIs and their VLAN IDs are equal on both switches.
Answer: D
NEW QUESTION 51
......
Pass Juniper JN0-362 Exam – Experts Are Here To Help You: https://easypass.examsreviews.com/JN0-362-pass4sure-exam-review.html