Maximum Grades By Making ready With 300-610 Dumps UPDATED 2023
Prepare 300-610 Exam Questions [2023] Recently Updated Questions
NEW QUESTION # 45
A client in a commercial building installs a Cisco blade server in the multitenant Cisco UCS blade infrastructure.
To cut operating costs, the client's data center is shared with other organizations. The client asks an engineer to prevent third parties from accessing their equipment and from accessing BIOS-related information when booting a server.
Which two policies must be used to meet these requirements? (Choose two.)
- A. post error pause
- B. CDN control
- C. ASPM support
- D. quiet boot
- E. front panel lockout
Answer: D,E
NEW QUESTION # 46
A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface.
Which action guarantees line rate traffic processing on the interface?
- A. Configure the interface rate mode as shared.
- B. Set local buffering with B2B_credits for the interface.
- C. Configure the interface rate mode as dedicated.
- D. Set global buffering with B2B_credits for the interface.
Answer: C
NEW QUESTION # 47
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.
Which solution meets these requirements?
- A. 1) Create a separate VRF for the testing and development environments.
2) Control reachability by using firewall access policies. - B. 1) Assign a separate VDC for the testing and development environments.
2. Place a firewall between the VDCs. - C. 1) Enable new routing instances for the testing and development environments in the same VDC.
2) Control reachability by using firewall access policies. - D. 1) Create a VRF for the testing and development environments.
2) Use ACLs to control traffic between the two environments.
Answer: A
NEW QUESTION # 48
A company runs mission -critical infrastructure in a single data center. Due to business growth It plans to open more data center in the coming years. A network engineer is asked to recommend a network technology for data center interconnection that allows scalability and seamless VM mobility while providing maximum security and fault isolation between data center. Which technology must be used to meet these requirements?
- A. Cloudsec
- B. UDLD
- C. OTV
- D. Trustsec
Answer: C
NEW QUESTION # 49
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)
- A. vNIC policy
- B. boot policy
- C. LAN connectivity policy
- D. firmware policy
- E. scrub policy
Answer: A,C
NEW QUESTION # 50
DRAG DROP
Drag and drop the technologies from the left onto the correct descriptions on the right.
Select and Place:
Answer:
Explanation:
Section: Storage Network Design
NEW QUESTION # 51
Refer to the exhibit.
An engineer is configuring a QoS policy with these requirements
Match-all AF11 traffic and set it to a DSCP value of 14.
The committed rate must be 10 Mbps with a committed burst rate of 1000 ms Drop any AF11 traffic that violates these settings.
Any traffic other than af11 must have a DSCP value of 0
The given class-map configuration already exists. Which solution must the engineer use to meet the requirements?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 52
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. in the hardware on the Cisco UCS VIC 12xx adapter or later
- B. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- C. on the host, by using multipathing software
- D. in the hardware on any Cisco UCS VIC adapter
Answer: C
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION # 53
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
- B. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- C. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
- D. Create a SAN port channel that faces the storage device to sustain a link failure.
Answer: A
NEW QUESTION # 54
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
- A. Increase the queuing buffer in the port-channel interface connected to the storage array.
- B. Add an additional FCoE VLAN to the SAN network.
- C. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
- D. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.
Answer: C
NEW QUESTION # 55
A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.
Which two data center design steps must be used to meet these requirements? (Choose two.)
- A. Configure application data replication to all backup data centers.
- B. Implement active cluster in data centers 1 and 2 and backup in 3 and 4.
- C. Provide application hosting services to customers from the closest data center.
- D. Use asynchronous replication between data centers 1 and 2.
- E. Deploy database services in data center 1 and application layer to other data centers.
Answer: A,C
NEW QUESTION # 56
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes, in addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6.
Which two components should be used to meet these requirements? (Choose two.)
- A. SVI interface
- B. SSH protocol
- C. Telnet protocol
- D. SNMP
- E. mgmt0 interface
Answer: B,D
NEW QUESTION # 57
An engineer needs an orchestration and monitoring tool that should be used for managing the storage networks and VXLAN fabrics. The tool should also allow support built-in dashboard and real-time health summary for managed devices. Which tool meets these requirements?
- A. Puppet
- B. Cisco Intersight
- C. Ansible
- D. Cisco DCNM
Answer: D
NEW QUESTION # 58
Which authentication software natively runs within the CLI of Cisco NX-OS devices?
- A. Puppet
- B. Python
- C. Chef
- D. Ansible
Answer: A
NEW QUESTION # 59
DRAG DROP
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Select and Place:
Answer:
Explanation:
Section: Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/ configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/ creating-vdc.html
NEW QUESTION # 60
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 61
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 62
An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and B-Series servers. Which solution should be included to meet these requirements?
- A. Pin the server ports of the service profile to dedicates uplink ports.
- B. Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports.
- C. Pin the vNlCs and vHBAs of the service profile to dedicated server ports
- D. Pin the IOM ports of the service profile to dedicated server ports.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_010.html#concept_7DE33CE2E37A47C6992C012D51CA37D4
NEW QUESTION # 63
......
Other Study Options
For self-study, it is better to choose well-structured materials that ensure learning the topics one-by-one in a smooth manner. Amazon can also improve your learning with books like “How I Passed Designing Cisco Data Center Infrastructure Exam” by Rocismo Liolentz Publications. It is available in the form of Kindle edition and is focused on not just concepts of the exam but helpful test-taking tips and methodologies.
Give push to your success with 300-610 exam questions: https://easypass.examsreviews.com/300-610-pass4sure-exam-review.html